NAVIGATION

■Limit (xx/h)

This enables you to specify a value manually so that a speed warning will be given if you exceed this speed (useful if using winter tyres, for example).

☞Select “Limit (xx/h)” and set the desired limit for the fixed speed warning.

☞Select “OFF,” if you wish to deactivate the speed warning.

■Aud. Warning

☞Select “Aud. warning” to activate and deactivate the audible speed warning for the legal and manually set speed limit.

Guidance screen

Here you can select the information which should appear on the guidance screen.

■Show event

☞Select whether traffic obstructions on your route should appear in the top line of the guidance screen or not.

■Remain. distance

☞Select whether the distance-to-go to the destination or via point should appear in the status field of the guidance screen or not.

■Times

☞Select which times should appear in the status field of the guidance screen. The following options are available:

–Current time

–Time of arrival

–Remaining time

–No time display

Dyn. Route sett.

Settings for dynamic route planning

This setting is only possible when “Dyn. route” is activated in the route selection menu, a TMC station is received (on the radio or via an optional TMC receiver) and a map CD is inserted.

■Re-route lev.

Use this setting to specify whether the navigation system should plan a detour in the event of traffic obstructions or not. Five levels are available. The lowest level (1) means that the direct route should go through the stationary traffic depending on the conditions and the anticipated delay. If the highest level is selected, an alternative route should be planned in most cases.

✎Level 3 is a standard setting for dynamic route planning. It is the factory setting (default).

■Horizon

This setting determines the radius in which the navigation system should take traffic obstructions into account when planning your route. Select a value between 25 and 150 km.

k

English

69