M I N U T E S |
|
1 2 / 3 1 | 1 2 : 5 9 A |
T u r n D i | a l |
S A V E : s a v e ?
Press the [SAVE] key to store the min- utes setting. The unit will then enter the AM/PM mode. Rotate the [JOG] knob to select the AM/PM. The LCD will display:
| A M / P M |
|
|
|
| 1 2 / 3 1 |
|
| 1 2 : 5 9 A |
| T u r n | D | i | a l |
| S A V E : s a v e ? | |||
|
|
|
|
|
or |
|
|
| |
|
|
|
|
|
| A M / P M |
|
|
|
| 1 2 / 3 1 |
|
| 1 2 : 5 9 P |
| T u r n | D | i | a l |
| S A V E : s a v e ? | |||
|
|
|
|
|
Press the [SAVE] key to store the AM/PM setting. The LCD will display:
A M / P M |
|
1 2 / 3 1 | 1 2 : 5 9 P |
P r o g r a m m e d !
After approximately five seconds, the dis- play will return to the highest level of the current setting.
Programming the Station Number
Each station must have a different station number. If two stations have the same number, one will continuously emit a ring tone after initializing. To program the Extension Number, enter the program- ming mode and turn the [JOG] knob until the display shows EXTENSION NO. The LCD will display:
E X T E N S I O N N O
T | u | r n | D | i | a l |
> | : | e n | t | e | r |
Press the NAVIGATION [>] key to begin selecting the Extension Number. NOTE: The default extension number is 11.
Rotate the [JOG] knob to select the extension number. The LCD will display:
E X T E N S I O N N O = 1 1
T u r n D i a l
S A V E : s a v e ?
•
•
E X T E N S I O N N O = 2 2
T u r n D i a l
S A V E : s a v e ?
Press the [SAVE] key to accept the set- ting. The LCD will display:
E X T E N S I O N N O = 2 2
P r o g r a m m e d !
After approximately five seconds, the dis- play will return to the highest level of the current setting.
Message Waiting Indicator Programming
The MSGW Waiting indicators may be manually turned on or off. To program the MSGW indicators for CO Lines, enter the programming mode and turn the [JOG] knob until the display shows MSGW ON/OFF. The LCD will display:
M S G W O N / O F F
T | u | r n | D | i | a l |
> | : | e | n t | e | r |
NSQ412
