Verizon NSQ412 owner manual Paging All Stations, G E a L L

Paging All Stations

A station can page all the stations simul- taneously. Press the [PAGE] key followed by the [*] key. The paging station’s LCD will display:

P A G E A L L

C I D : 1 0 0 / 1 9 8

The paged stations will emit a single beep. The LCD of all stations that accept the page will display:

P A G E A L L B Y 1 2

C I D : 1 0 0 / 1 9 8

The message can then be announced to all idle stations. Any station can answer an all-station page. Pressing the [PAGE] key at a paged station does this.

Mute Operation

Press the [MUTE] key to temporarily remove the outgoing audio to the calling party. Pressing the [MUTE] key again deactivates the feature. The integrated

LED will illuminate when the mute fea- ture is active. The mute status remains the same when switching between the handset, handsfree and headset.

Pause Operation

Pressing the [PAUSE] key will automati- cally insert a 3-second waiting period in the dialing sequence. Multiple pauses can be used for a longer waiting time. A pause may be stored in Speed Dial (it will count as one digit in memory for each pause used). The audio can be heard during the pause, so the call progress can be monitored.

Flash Key Operation

Pressing the [FLASH] key will cause the telephone to open the telephone line for a programmed amount of time. The flash time can be set in programming from 100mS to 1200mS, in 100mS incre- ments. The flash may be stored in the Directory and Speed Dial locations (it will count as one digit in memory for each one used). It will not be stored in the Last Number Redial when manually dialed. It will be stored in the Last Number Redial

when dialed from the Directory or Speed Dial.

The flash key should be used to access telephone special features such as call waiting and 3 way calling.

Temporary Tone Dialing

The telephone dialing can be temporarily changed to tone when the default dialing is set to pulse in programming mode.

Press the [*/TONE] key when tone serv- ice is needed. A 1.5-second pause will be inserted between the last pulse digit and the first tone digit. The tone dialing will continue until the telephone is hung up or the [FLASH] key is pressed (then the dial mode reverts back to pulse).

NSQ412 Four-Line Caller ID Telephone Owner’s Manual 23