Verizon NSQ412 owner manual Setting Up the Caller ID Operation, Receiving Caller ID

If you have only Caller ID service, you will not receive or display Call Waiting Caller ID information.

Setting Up the Caller ID Operation

Different telephone companies offer dif- ferent dialing plans, which may or may not require the user to dial a “1” when dialing toll calls. Some areas require 7- digit dialing for local calls while other areas require 10-digits.

The NSQ412 can be programmed to work in all of these areas. Each station provides one programmable home area code and five programmable local area codes. These programmable area codes will determine how a Caller ID number is displayed, stored and dialed. When the calling number originates from the area code that matches the one programmed into the Home Area Code, the LCD will display and dial only the local, 7-digit calling number. For example:

1 2 / 2 6	1 2 : 0 8 P
L 1
J A N E	D O E

5 5 5 3 3 3 3

When the calling number originates from the area code that matches one pro- grammed into a Local Area Code, the LCD will display and dial the regional,

10-digit number (area code + local 7-digit number). For example:

1 2 / 2 6	1 2 : 0 8 P
L 3
J O H N	S M I T H

8 1 2 5 5 5 2 2 2 2

When the calling number does not origi- nate from any of the programmed area codes, the LCD will display the actual number when the calling number is less than 10-digits long. For example:

1 2 / 2 6 1 2 : 0 8 P L 2

P A U L S H O R T 2 1 3 0

See the section Area Code Programming to set up the station for proper Caller ID display.

Receiving Caller ID

When received during ringing, the Caller ID info will appear in the display. For example, the LCD will display:

	1 2 / 2 6	1 2 : 0 8 P
	L 2
	J O H N S M I T H
	5 5 5 2 2 2 2
"12/26 12:08P"		The current time.
"L2"		The CO Line which
		received the call.
“JOHN SMITH”		The caller’s name.
“5552222”		The caller’s phone
		number.

The display will return to its previous dis- play under the following conditions:

a.In 4 - 6 seconds after ringing stops from the caller hanging up.

b.The call is answered by another system phone.

c.The phone that answers the call ends the call.

When ringing occurs on two or more lines at the same time, the display will show the latest Caller ID information received. For example, L3 begins to ring, followed by L1 and then L2. As the Caller ID data is received on each line, it is dis- played until the next one is received. For example, L3 rings and the LCD will dis- play:

NSQ412 Four-Line Caller ID Telephone Owner’s Manual 32