Verizon NSQ412 Delayed Ring Programming, Line Usage Programming, L a Y N G, L a Y R I N G

Delayed Ring Programming

A station may be set to delay the phone from ringing from 2 to 30 seconds after a call comes in. This feature will function on all telephone lines connected to the station when active. To program the Delayed Ring, enter the programming mode and turn the [JOG] knob until the display shows DELAY RING. The LCD will display:

D E L A Y			R I N G
T	u	r n	D	i	a l
>	:	e n	t	e	r

Press the NAVIGATION [>] key to begin programming the Delayed Ring. Rotate the [JOG] knob to change the delay time. The LCD will display:

	D E L A Y			R I N G
	=	O	f f
	T	u r	n	D i a l
	S A V E : s a v e ?
or
	D E L A Y			R I N G
	=	0 2		s e c
	T	u r	n	D i a l
	S A V E : s a v e ?

•

•

D E L A Y R I N G

=3 0 s e c

T u r n D i a l

S A V E : s a v e ?

Press the [SAVE] key to confirm the selection. For example, the LCD will dis- play:

D E L A Y R I N G

=1 6 s e c

P r o g r a m m e d !

After approximately five seconds, the dis- play will return to the highest level of the current setting.

Line Usage Programming

Each of the lines can be disabled. This will turn off the [CO Line] key and LED. Use this for any lines on the station that are not wired to a telephone number. To program the Line Usage, enter the pro- gramming mode and turn the [JOG] knob until the display shows LINE USAGE. The LCD will display:

L I N E			U S A G E
T	u	r n	D	i	a l
>	:	e	n t	e	r

Press the NAVIGATION [>] key to begin programming the Line Usage. Rotate the [JOG] knob to change the CO Line num- ber. The LCD will display:

	L 1		U S A G E
	T	u	r	n		D	i	a	l
	>	:		e	n	t	e	r
•
•
	L 4		U S A G E
	T	u	r	n		D	i	a	l
	>	:		e	n	t	e	r

Press the NAVIGATION [>] key to select the CO Line. Rotate the [JOG] knob to change the Line Usage. For example, the LCD will display:

L 3 U S A G E

=O n

T u r n D i a l

S A V E : s a v e ?

NSQ412 Four-Line Caller ID Telephone Owner’s Manual 44