Verizon NSQ412 owner manual Tone or Pulse Dial Programming, Flash Time Programming, A S H M E

Tone or Pulse Dial Programming

The station can be set to dial in Tone or Pulse. To program the Tone/Pulse dial, enter the programming mode and turn the [JOG] knob until the display shows TONE/PULSE. The LCD will display:

T O N E / P U L S E

T	u	r n	D	i	a l
>	:	e	n t	e	r

Press the NAVIGATION [>] key to begin programming the Tone/Pulse dialing. Rotate the [JOG] knob to change the selection. The LCD will display:

T O N E / P U L S E

=T o n e

T u r n D i a l

S A V E : s a v e ?

or

T O N E / P U L S E

=P u l s e

T u r n D i a l

S A V E : s a v e ?

Press the [SAVE] key to confirm the selection. The LCD will display:

T O N E / P U L S E

=P u l s e P r o g r a m m e d !

After approximately five seconds, the dis- play will return to the highest level of the current setting.

Flash Time Programming

The amount of time the station opens the telephone line when the [FLASH] key is pressed can be changed. To program the Flash Time, enter the programming mode and turn the [JOG] knob until the display shows FLASH TIME. The LCD will dis- play:

F L A S H				T I M E
T	u	r n	D	i	a l
>	:	e n	t	e	r

Press the NAVIGATION [>] key to begin programming the Flash Time. Rotate the [JOG] knob to change the selection. The LCD will display:

	F L A S H				T I M E
	=	0	. 1		s	e	c
	T	u r	n	D	i	a	l
	S A V E : s a v e ?
•
•
	F L A S H				T I M E
	=	1	. 2		s	e	c
	T	u r	n	D	i	a	l
	S A V E : s a v e ?

Press the [SAVE] key to confirm the set- ting. The LCD will display:

F L A S H T I M E = 1 . 2 s e c

P r o g r a m m e d !

After approximately five seconds, the dis- play will return to the highest level of the current setting.

NSQ412 Four-Line Caller ID Telephone Owner’s Manual 47