Installation of Logs, Large Lava Rock | Vermont Casting DVRT41

DVRT41 Direct Vent Gas Fireplace

Screw	Burner	Screw
	Burner
Hearth Panels		Grate
	Front of Unit	FP1482

Fig. 47 Hearth panel location.

Installation of Logs

Remove front glass. (Refer to "Window Frame Assem- bly Removal" Section, Fig. 46) Remove logs from packaging.

As with all plastics — these are not toys and should be kept away from children and infants.

Log Identification Chart

LOGS	DVRT41
Log Front Left	G10
Log Front Right	G6
Log Rear	G7
Log Crossover Left Top	G8
Log Front Center	G9

Refer to Figure 48.

1.Fit rear log (G7) in place. The two (2) underside holes of the log fit over the two (2) pin studs of the rear log bracket.

2.Place the front left log (G10). Position the front branch between the second and third grates from the left. The left end of this log with a slot will set against the back of the first grate from the left.

3.Place the front right log (G6). Position the front bottom recessed step of the log against the horizon- tal bar of the front grate at the right. The center bottom recessed step will set against the right end of the burner housing.

4.Place burner lava rock and 1/3 of the bag of plati- num embers on the front area of the burner. (Fig. 48)

5.Place the front center log (B129). Position the log notch against the third grate from the right. The other end of the log’s bottom has a round recessed hole that rests on top of the round knob located at the center of the rear log.

6.Position the cross over left top log (G8) by locating the bottom rectangular slot of this log onto the rear log knob on the left. The other end of the log will set on top of the left front log cutout.

7.Place large lava rock around the front grate area as shown in Figure 48.

Log Crossover	Log Rear
Left Top	(G7)	Log Front Center
(G8)		(G9)
		(G9)

Log Front

Left

(F10)Log Front

Right (G6)

		Burner Lava Rock
		and 1/3 of the bag
	Volcanic Lava Rock	of Platinum
	Volcanic Lava Rock	Embers
		Embers

LG339

Fig. 48 DVRT41 log, burner lava rock, platinum embers and volcanic lava rock placement.

Burner Lava Rock Placement

Place burner lava rock on the burner in front of the front logs. Do not place burner lava rock in the inside corners of thefront logs.

Large Lava Rock

The large lava rock provided with this fireplace must be placed on the firebox base around the sides of the burner assembly and on the tray beneath the grate.

Under no circumstances should this large lava rock be placed on any part of the burner assembly.

Flame & Temperature Adjustment

For fireplaces equipped with Hi/Lo valves, flame adjust- ment is accomplished by rotating the Hi/Lo adjustment knob located near the centre of the gas control. (Fig. 49 or 50)

Honeywell Valve

Turn
counterclockwise	LO	HI	Turn clockwise
to decrease	LO		to increase
to decrease			to increase
flame height			flame height

Fig. 49 Flame adjustment knob for Honeywell valve.

10006740

DVRT41 specifications

The Vermont Casting DVRT41 is a remarkable gas fireplace that harmoniously combines contemporary aesthetics with advanced heating technology. Designed to enhance any living space, the DVRT41 stands out with its impressive features and functionality, making it a popular choice for those looking to elevate their home environment.

One of the most notable features of the DVRT41 is its efficient heat output. With an impressive BTU range, this fireplace can warm spaces effectively while maintaining low emissions. This efficiency is complemented by Vermont Castings' commitment to sustainability, ensuring that the DVRT41 aligns with environmental considerations.

Aesthetically, the DVRT41 offers a customizable experience. Consumers can choose from various faceplate designs, glass door styles, and finishes to match any décor. The fireplace’s large viewing area provides an unobstructed view of the flames, creating a cozy atmosphere that’s perfect for gatherings or quiet evenings.

The DVRT41 incorporates advanced technologies aimed at maximizing user experience. The fireplace features an intuitive remote control for convenience, allowing users to adjust flame height and heat output easily. This adaptability ensures that homeowners can create the perfect ambiance at any time. The ignition system is designed for reliability and ease, ensuring that starting the fireplace is hassle-free, even in challenging conditions.

Safety is a top priority with the DVRT41. The unit includes features such as a safety shut-off system and a tempered glass front to prevent accidental burns. Additionally, the design allows for efficient venting, minimizing the risk of backdraft or buildup of harmful gases.

Maintenance is straightforward, thanks to the unit's design. The DVRT41 is constructed with durable materials that resist corrosion and wear, ensuring longevity and reduced upkeep costs. Regular cleaning is simple, ensuring that the fireplace remains functional and beautiful for years to come.

Overall, the Vermont Casting DVRT41 gas fireplace is not only a source of warmth but also a stunning focal point within any home. Its blend of efficiency, safety, and design flexibility make it a top choice for homeowners seeking an effective heating solution that doesn’t compromise on style or substance. The DVRT41 exemplifies Vermont Castings' commitment to quality, ensuring that every unit delivers exceptional performance and aesthetic appeal.

Vermont Casting DVRT41 Installation of Logs, Log Identification Chart, Burner Lava Rock Placement

Models: DVRT41