Figure 48

Log Right

 

 

Grate (F49)

Chateau™ Direct Vent Gas Fireplace

10.Position the log right grate. (Fig. 48) Hold the log with your right hand with the pointed end toward the left and the flat surface facing down. Hook the notch located on the right corner of the log through the first opening on the right hand side of the fettle using the first tine. Bring the log toward you until it comes in contact with the fettle. Then rest the pointed end over the middle log positioned in Step 9. Repeat this step for opposite side.

LG504

Figure 49

Log Front Right (F48)

LG505

 

Figure 50

Log Front Upper Right (F47)

LG506

11.Position the log front right. (Fig. 49) Hold the log with the two (2) branches toward you. Set the left branch on the inside of the second tine of the fettle and drop the right branch on the overlay behind the log positioned in Step 7. Lay the other end of the log over the notch located on the log positioned in Step 10. Make sure to clear the opening on the overlay when looking straight down.

12.Position the log front upper right. (Fig.

50)Hold the log with narrow end toward you. Set the narrow end over the flat notch on the log right grate positioned in Step 10. Lay the wide end of the logs over the branch on the log left grate positioned in Step 8.

20011957

31

Page 31
Image 31
Vermont Casting DVT38S2IN installation instructions Log Right