Vermont Casting DVT44 installation instructions Chateau, Position the Log Rear Left, 20011956

Models: DVT44

1 44
Download 44 pages 20.38 Kb
Page 25
Image 25
9.Position the Log Rear Left
Figure 45

7.Position the Log Grate Right and Left. Position the right and left grate logs simultaneously on the grate in front of the burner housing by hold- ing the two logs with the narrower end toward the middle and the bark details toward the front. Set the logs and lean forward toward the grate. The outer end of the logs should line up with the grate on the outside. (Fig. 43)

8.Position the Log Rear Right . Posi- tion the log rear right by holding the log at an angle with the pointed end down toward the bottom. Set the

Figure 43

Log Grate Left

Chateau™

Log Grate Right

LG402

Figure 44

Log Rear

Log Rear Right

Left

 

pointed end on the matching notch on the overlay toward the right. Rest the wide end toward the back right. The log rests in place by touching the rear refractory lower on the right. (Fig. 44)

9.Position the Log Rear Left

. Position the log rear left by holding the log at an able with the pointed end down toward the bottom. Set the pointed end on the matching notch on the overlay toward the left. Rest the wide end toward the back left. The log rests in place by touching the rear

10. Position the Log Front Left. Posi- tion the log front left by holding the log

with the wide end toward the front and the nar- row end toward the back. Set the rectangular indentation located on the bottom of this log over the rectangular protrusion on the far left end of the log grate left. Lay the pointed end of the log over the burner overlay outside

the log rear left. (Fig. 45)

11.Position the Log Front Middle Left. Position the log front middle left by holding the log with the wide end toward the front and the narrow end toward the back. Set the round indentation located on the bottom of this log over the round protrusion

on the rear left log. Set the log over the fettle where the V-shaped end on the front

of this log (split area) comes in contact with the second left tine on the fettle. (Fig. 45)

Log Front Left

Log Front

Middle Left

LG405

refractory lower on the left.

(Fig. 44)

 

 

Log Front Right

LG404

Log Front Middle

Right (DVT44)

20011956

25

Page 25
Image 25
Vermont Casting DVT44 installation instructions Chateau, Position the Log Rear Left, 20011956