2
PRESSURE REGULATOR INSTALLATION
STEP 1
Mount the 1/2” NPT (conical) male connector to the pressure regulator and
tighten by using a wrench.LOCK Do not over tighten the connector.
Over tightening may crack regulator.
Arrow
Fig. 2.2
STEP 2
Assemble the 1/2” NPT connector + pressure regulator group to the extension pipe interposing the gasket supplied. The regulator cover must be oriented toward the front side of the range.
IMPORTANT: use two wrenches to tighten the connection.
Gasket
Regulator cover | Fig. 2.3 |
|
13
