Using The Other Features |
9.10 Setting The Volume Control
∙There are four ringer loudness levels (plus an off position). Set the level as follows:
1.While your telephone is on hook and idle, press VOLUME UP or VOLUME DOWN once for each change in loudness that you desire. The ringer sounds once for each change as an example of the current setting. Your selection becomes the new default setting and will result in your telephone ringing at that level for all future calls (until you change the default by repeating the above procedure).
NOTE: If you set the ringer to the “off” position, your telephone will sound a short ring burst once for each call you receive at your station while the ringer is off.
∙There are eight speaker loudness levels. Set the level for the current call as follows:
1.While on a call and in speakerphone mode, press VOLUME UP or VOLUME DOWN once for each change in loudness that you desire.
∙There are eight background music loudness levels. Set the level as follows:
1.While background music is on at your station, press VOLUME UP or VOLUME DOWN once for each change in loudness you desire. This level will remain set for background music until you change it again, even if you turn off the feature and then reactivate it.
∙There are eight handset loudness levels. Set the level for the current call as follows:
1.While on a call and in handset mode, press VOLUME UP or VOLUME DOWN once for each change in loudness that you desire.
9 – 6 LCD Station User's Guide