Welding parameters, Stud Welder BMS-660-90 | Vicks PS-0K, PS-3K

R

Initialisation

5.4Welding parameters

The following charging voltages specified in the diagram below are standard values which have been determined in combination with the respective stud welder and the standard Welding Pistol PS-1. AlMg3 and StVK were used as stud material, AlMg3 or St. as base material. The charging voltages vary from the stated setting according to the material type, workpiece thickness and surface condition of the workpiece.

5.4.1 Stud Welder BMS-660-90

Charging voltage (V)

220

200

180

160

140

120

100

80

60

M3	M4	M5	M6	M8
	Stud diameter

SZ.0011.E

5.4.2 Stud Welder BMS-690-135

Charging voltage (V)

220

200

180

160

140

120

100

80

60

M3	M4	M5	M6	M8
	Stud diameter

SZ.0012.E

5-22

Image 29

Vicks PS-0K, PS-3K, PS-1K operating instructions Welding parameters, Stud Welder BMS-660-90, Stud Welder BMS-690-135

Contents

PS-3K PS-0K PS-1K PS-3K PS-0K PS-1K GmbH Page Table of Contents Maintenance Setting the Stud Welding PistolInitiation Quality control Spare parts Following should be principally observed General information Intended use Chapters of Operating Instructions Information on the documentation Reaction in the case of malfunctions Information on Operating Instructions Technology of tip ignition Description of the Stud Welding Pistols Stud Welding Pistol PS-1 Stud Welding Pistol PS-3K Stud Welding Pistol PS-0K PS OM Stud Welding Pistol PS-1K PS-1 PS-3K PS-0K PS-1K Technical data Characterisation of references in the Operating Instructions Safety instructions Staff qualification and training Safety-conscious working Following should be observed prior to initiation Safety instructions for the User/Operator Before starting welding operations Safety measures at the installation site Independent retrofitting and spare parts production Working with the Stud Welder Non-permissible operating modes Setting the Stud Holder Setting the Stud Welding Pistol Installing the stud holder in the Stud Welding Pistol Spring pressure Setting the spring pressure General view Initiation Operation Connecting the Stud Welding Pistols to the Stud Welder Stud Welder BMS-690-135 Welding parametersStud Welder BMS-660-90 Stud Welder BMS-8H Stud Welder BMS-6H Quality Control Type and scope of testingGeneral information Demands on the company Normal work test Implementation of sample takingSimplified work test Production of samples Bending test Tension test Replacing components MaintenanceStud Welding Pistols Spare parts Spare parts list for Stud Welding Pistol PS-1 Perspective presentation of Stud Welding Pistol PS-1 Spare parts list for Stud Welding Pistol PS-3K Perspective presentation of Stud Welding Pistol PS-3K Spare parts list for Stud Welding Pistol PS-0K Perspective presentation of Stud Welding Pistol PS-0K Spare parts list for Stud Welding Pistol PS-1K Perspective presentation of Stud Welding Pistol PS-1K Troubleshooting Functional breakdowns Standards and List of Directives Warranty Terms Heinz Soyer Bolzenschweißtechnik GmbH