Vicks PS-0K, PS-3K, PS-1K operating instructions Stud Welding Pistol PS-1

R

Description of the Stud Welder Pistols

2.2Stud Welding Pistol PS-1

The SOYER® Stud Welding Pistol PS-1 is designed for a wide variety of applications. The field-proven patented Positioning Pistol has a handy design, is lightweight and is injection moulded of shock-proof, fully insulated plastic.

With this pistol the welding stud can be positioned exactly on a specific part of the workpiece without requiring any auxiliary aids. Templates are not required.

Before welding the stud position has to be marked or centred slightly. The calibrated ignition tip is then positioned on the marked point. When the pistol is operated, the stud is mechanically lifted. A necessary air gap is created between the tip and the workpiece. The stud is then mechanically moved to the marked point and is welded with electric arc ignition as soon as the marked point is reached.

The pistol guide is protected by rubber bellows especially against weld spatters and dirt.

A special spring pressure display with scale shows the spring pressure for the respective welding task and enables the reproducibility of welding joints, if necessary.

.

Ø 6

Ø 40 Ø 34 3x120°

211

Federdruck

Bolzenschweißer

Typ PS-1

3 2 1

132

SZ05.0693.005.D

2-6