Vicks PS-0K, PS-3K, PS-1K operating instructions Table of Contents

R

Table of Contents

Table of Contents

1.General information ________________________________________________ 1-1

1.1The following should be principally observed .. ______________________________ 1-1

1.2Intended use __________________________________________________________ 1-2

1.3Information on the product ______________________________________________ 1-2

1.4Serial number _________________________________________________________ 1-2

1.5Information on the documentation ________________________________________ 1-3

1.5.1Chapters of Operating Instructions ________________________________________ 1-3

1.5.2Information on the Operating Instructions __________________________________ 1-4

1.5.3Reaction in the case of malfunctions ______________________________________ 1-4

1.6Contacts and service adress _____________________________________________ 1-4

2.Description of the Stud Welding Pistols _____________________________ 2-5

2.1Technology of tip ignition ________________________________________________ 2-5

2.2Stud Welding Pistol PS-1 ________________________________________________ 2-6

2.3Stud Welding Pistol PS-3K ______________________________________________ 2-7

2.4Stud Welding Pistol PS-0K ______________________________________________ 2-8

2.5Stud Welding Pistol PS-1K ______________________________________________ 2-9

2.6Technical data ________________________________________________________ 2-10

3.Safety instructions ________________________________________________ 3-11

3.1Characterisation of references in the Operating Instructions __________________ 3-11

3.2Staff qualification and training ___________________________________________ 3-12

3.3Dangers resulting from non-observance of safety instructions ________________ 3-12

3.4Safety-conscious working ______________________________________________ 3-12

3.5Safety instructions for the User/Operator __________________________________ 3-13

3.6The following should be observed prior to initialisation ... ____________________ 3-13

3.7Before starting welding operations ... _____________________________________ 3-14

3.8 Safety measures at the installation site ___________________________________ 3-14

3.9Working with the Stud Welder ___________________________________________ 3-15

3.10Safety instructions for maintenance, inspection and assembly operations ______ 3-15

3.11Independent retrofitting and spare parts production ________________________ 3-15

3.12Non-permissible operating modes _______________________________________ 3-16

i