Vidikron Vision 30 manual On-Screen Display Menus

On-Screen Display Menus

This unit is equipped with an on-screen display

(OSD) menu for making adjustments and changing Using the Menu settings. There are five menu languages; see

the Language setting under “Installation” on page 40.

EXITMENU

•Press MENU to turn on/off the OSD menu.

NOTE: If the Main Menu is displayed, you can also press EXIT to turn it off.

•Use the arrow buttons (▲,◄,▼,►) to select items in the menu or to make various adjustments.

•Press ENTER to select an item to change, or press EXIT to return to the previous menu.

When the MENU button is pressed, the Main Menu (shown below) appears on the screen.

Use the ▲ or ▼ button to move to an item, then press ENTER to select it. The menus are Main Menu described more fully in the following sections.

Vision Model 30

Picture Adjust	Picture Adjust: brightness, contrast, color
Image Option	level, tint, sharpness, color temperature
	and color select
Projector Status
Installation	Image Options: input selection, aspect
Service	ratio, SD (480i) enhance, video filter, HD/
ISF Calibration	RGB adjust, blue enable, save/load saved
	settings
	Projector Status: load default settings (no
	confirm), sleep timer, lamp power, lamp
	hours
	Installation: OSD language, image
	orientation, keystone correction, OSD
	position, OSD timer, PIP/PBP setup,
	background color
	Service: white balance, gamma selection,
	ICC adjust, image over-scan, video black
	level, image shift, amplitude, fan control,
	lamp timer reset, RS-232 baud rate, change
	IR remote code
	ISF Calibration: picture adjust, white balance,
	gamma selection, blue enable, save ISF
	settings, splash screen timer, ISF splash
	screen enable

Vidikron Vision Model 30 Owner’s Operating Manual 33