Image Options
Vision Model 30
Picture Adjust
Image Option
Projector Status
Installation
Service
ISF Calibration
Image Option
Input Select
Aspect Ratio
SD Enhance
Video Filter
HD/RGB Adjust
Blue Enable
Save Settings
Load Saved Settings
Input Select
Aspect Ratio
To access additional image settings, press MENU, then press the ▲ or ▼ arrows to highlight Image Option and press ENTER. The Image Option
To select a source signal, highlight Input Select, press ENTER and select Video,
To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio from the Image Option menu and press ENTER. There are six aspect ratios available that can be selected for video signal inputs:
• Anamorphic | • Letterbox |
The image is compressed vertically, | The image in the Letterbox mode is |
but anamorphic software will appear | stretched vertically, and the top and bottom |
properly proportioned. This is best | portion ‘blanked off’. This ratio is best suited |
suited for use with 16:9 DVDs and HDTV | for LaserDisc movies or |
programming. | DVDs. |
Active Image Area
Active Image Area
• Standard (4/3)
The input signal is scaled to fit in the center of the 16:9 screen.
Active
Image Area
• IntelliWide
A 4:3 image is transformed into a 16x9 image.
36 | Vidikron Vision Model 30 Owner’s Operating Manual |
