ViewSonic CD4200 Controls & Adjustments, General Adjustments, Turning the LCD On and Off Turn On

ENGLISH

CONTROLS & ADJUSTMENTS

General Adjustments

Turning the LCD On and Off

Turn On

Plug the power cable into the AC-in socket located on the left rear of the LCD. Plug the other end into an electrical socket.

Press the power button on the remote control or right side of the LCD to turn it on. Please refer to page 16 to adjust Power Consumption settings.

The power status light found in the lower right corner of the LCD indicates the following :

BLUE LIGHT	─ power on
PURPLE LIGHT ─ Standby, power saving
	(only available in PC mode)
RED LIGHT	─ power off

Turn Off

Press the power button on the remote control or right side of the LCD to turn it off.

NOTE : “No Signal” appears, if there is no input source. The display will power off automatically, if the input source keeps unavailable.

16 ViewSonic CD4200