ViewSonic CD4200 manual Searching for a Device Code, English, ViewSonic

ENGLISH

Searching for a Device Code

If none of the codes listed under Device Codes list match your device, you can search for a set of commands that will work. Your Remote will sample all the codes in its system to find one that will allow you to control your device.

As the Remote searches its library, it starts with the most popular device in the category and works through to the end. To cycle through each available device code and sample its functions:

Mode → <<SET>> (2 blinks)→ [9] [9] [1] (2 blinks) →Device Group No. (2 blinks)→ Power → [CH +] →[CH +]→[CH +] → … SET (2 blinks)

STEP 1 Select the [MODE] by pressing VCR, CBL, or AUX.

STEP 2 Depress and hold <<SET>> button for a minimum of 3 seconds until LED blinks twice.

STEP 3 Enter the code sequence [9][9][1]. The LED blinks once for every digit entered except for the last digit, where it shall blink twice to confirm that [9][9][1] are entered correctly.

STEP 4 Press Power button. Then, pressing CH+ repeatedly to cycle through each corresponding function until your device turns off (or on).

STEP 5 Pressing SET button will store the new device code and returns to normal operation. The LED blinks twice in confirmation.

Mode	Device Assignment	Device
		Group no.
TV	Locked to this LCD (Default)	-------
VCR	Universal VCR, DVD, PVR	2
CBL	Universal Cable, Satellite, Video Accessory	0
AUX	Universal Tuner, Amplifier, CD, Mini Disc. And Misc. Audio,	3
	Home Automation

Example: [VCR ]→<<SET>> (2 blinks) →[9]→[9]→[1] (2 blinks) → [2] (2 blinks) → [POWER]→[CH +] →[CH +]→… [SET] (2 blinks).

34 ViewSonic CD4200