ViewSonic PJ1065 manual Setup Menu, horizontal size is excessive. In such cases, press the

Setup Menu

The following adjustments and settings are pos- sible when SETUP is selected at the top of the menu. Part of the Setup menu differs between RGB input and video input. Select an item with the and buttons, and start operation. Use the Single menu to reduce menu size (see Table 3, MENU SELECT).

RGB IN 1	VIDEO
RGB IN 2	S-VIDEO
DVI	COMPONENT VIDEO

Table 4: Setup Menu

Item			Description			RGB IN 1	DVI	VIDEO
								S-VIDEO
						RGB IN 2		COMPONENT
BRIGHT	Adjustment: Dark		Light			√	√	√
CONTRAST	Adjustment: Weak		Strong			√	√	√
V POSIT	Adjustment: Down		Up			√	−	−
H POSIT	Adjustment: Left		Right			√	−	−
H PHASE	Adjustment: Left		Right			√	−	√
	• Adjust to eliminate flicker.
	Adjustment: Small		Large
H SIZE	• The image may not be displayed correctly if the					√	−	−
	horizontal size is excessive. In such cases, press the
	RESET button, and initialize the horizontal size.
SHARPNESS	Adjustment: Soft		Clear			−	−	√
COLOR	Adjustment: Light		Dark			−	−	√
	Adjustment: Red		Green			−	−	√
TINT	• Valid only when NTSC or NTSC 4.43 signal is
	received.
COLOR BAL R	Adjustment: Light		Dark			√	√	√
COLOR BAL B	Adjustment: Light		Dark			√	√	√
	Select Image Aspect Ratio:
	Select position of image:			] has been		√	√	−
	Press the	button when 16:9 [
	selected.
	Center→	Down→	Up (→ Center )
	Select Image Aspect Ratio:			small[	]
ASPECT	Select position of image:
	Press the	button when 16:9 [		] / 4:3 small [	]
	has been selected.					−	−	√
	Center→	Down→	Up (→ Center )
	• 4:3 small cannot be selected with the input of 720P
	or 1080i component.
	• 4:3 small may not be displayed correctly with some
	input signals.

12ViewSonic PJ1065