ViewSonic PJ1065 Input Menu, Automatic Adjustment at RGB Input Select the EXECUTE with the button

Input Menu

The following functions are available when INPUT is selected on the menu. Select an item with the and buttons, and start or stop operation with the and buttons. The function indicated (**) are effective on video input mode, the P.IN P. window on RGB input mode.

			Table 5: Input Menu
Item			Description
	Automatic Adjustment at RGB Input: Select the EXECUTE with the button.
	Horizontal position (H.POSIT), vertical position (V.POSIT), clock phase
	(H.PHASE), and horizontal size (H.SIZE) are automatically adjusted. Use with
	the window at maximum size in the application display.
	Automatic Adjustment at Video Input: Select the EXECUTE with the
AUTO	button. A signal type appropriate for the input signal will be selected
	automatically. Valid only when AUTO is set for VIDEO on the menu.
	• This operation requires approximately 10 seconds. It may not function correctly
	with some input signals. Pressing the AUTO button in this case may correct this
	problem.
	• This function is the same as for the AUTO function in Basic operation.
	Displays RGB Input Frequency: Displays the horizontal and vertical sync
RGB	signal frequencies for RGB input.
	• Valid only at RGB input.
	Select Video Signal Type: Select the signal type with the and buttons.
	Select NTSC, PAL, SECAM, NTSC4.43, M-PAL, or N-PAL as appropriate for the
	input signal. The selection of AUTO enables and executes the function AUTO
	(Automatic Adjustment at Video Input), except for the N-PAL input.
	• Use this function when the image becomes unstable (eg. the image becomes
VIDEO (**)	irregular, or lacks color) at VIDEO/S-VIDEO input.
	• Automatic Adjustment requires approximately 10 seconds. It may not function
	correctly with some input signals. Pressing the AUTO button in this case may
	correct this problem except for the N-PAL input.
	• For the COMPONENT VIDEO input, this function is not effective and the signal
	type is distinguished automatically.
	Set/Clear Noise Reduction Mode: Select the TURN ON / TURN OFF with the
VIDEO NR		button. When the TURN ON is selected, the NR mode is active and the
(**)	noise on screen of the video input will be reduced.
	• Valid except for the HDTV.
	Select Progressive Mode: Select the mode suitable for the input signal with the
		buttons. The TV mode and the FILM mode convert the interlaced video
Progressive	signal into the progressive signal. The FILM mode is adaptable 2-3 Pull-Down
(**)	system to the conversion.
	• Use this function to raise resolution, at the interlaced video input except HDTV
	signal.
	Set/Clear Black Enhancement Mode: Select the TURN ON / TURN OFF with
BLACK **)	the	button. When the TURN ON is selected, the black enhancement
	mode is active and the contrast ratio of the screen for the video input will be
	raised by making black level darker.
HDTV (**)	Select HDTV mode: Select the 1035i mode or 1080i mode suitable for the input
	signal with the		button.

ViewSonic PJ1065 13