ViewSonic PJ1065 manual Image Menu, Select Position of P. in P. Display Press the

Image Menu

The following adjustments and settings are available when IMAGE is selected on the menu. Select an item with the and buttons, and start or stop operation with the and buttons.

Table 6: Image Menu

Item			Description
	Select Blank Screen: Select the screen with the /			button. The selected one
	(MyScreen, ORIGINAL or one colors) is displayed when the BLANK mode is ON.
	MyScreen is a mode that the customer-customized screen is displayed. This is
BLANK	the blue screen at the factory setting. Refer to the description of MyScreen below.
	ORIGINAL is a mode that the factory fixed screen is displayed.
	• When MyScreen or ORIGINAL is selected, the screen is going blank after
	several minutes.
	Select Start Up Screen: Select the screen in case of no signal input with the /
	button. The selected one (MyScreen, ORIGINAL or TURN OFF) is displayed
	when no signal is input
	MyScreen is a mode that the customer-customized screen is displayed. This is
START UP	the blue screen at the factory setting. Refer to the description of MyScreen below.
	ORIGINAL is a mode that the factory fixed screen is displayed.
	TURN OFF displays the blue screen.
	• When MyScreen or ORIGINAL is selected, the screen is going blank after
	several minutes.
	Set MyScreen Mode: Select the EXECUTE with the			button to display the
	MyScreen menu and set the MyScreen mode for BLANK and START UP
	functions.
	ESC clears and closes the menu box.
	NORM. is default of the MyScreen menu.
	FREEZE freezes the image and displays the frame to capture.
	Press the button after freeze to go to the MyScreen Capture Position mode.
	In the MyScreen Capture Position mode, the buttons			, ,	and allow to
	move the frame to capture.
MyScreen	After adjusting the position, press the KEYSTONE button to go to the MyScreen
	Display Size mode.
	To cancel freezing and return to the NORM. Mode of the MyScreen menu, press
	the RESET button.
	In the MyScreen Display Size mode, select the magnification x1, x2 or FULL with
	the button	.
	After selecting the magnification, press the KEYSTONE button to go to the CAPT.
	mode and start capturing.
	To return to the MyScreen Capture Position mode, press the RESET button.
	CAPT. executes a capturing the image. It requires about 20 seconds. After
	capturing, the captured image will be displayed for about 10 seconds.
MIRROR	Select Mirror Status: Select mirror status with			button.
P. IN P.	Select Position of P. in P. Display: Press the			button.
POSIT	• Valid only at RGB IN 1, RGB IN 2 or DVI input.
P. IN P.	Select signal of P. in P. Display: Press the			button.
INPUT	VIDEO	S-VIDEO	COMPONENT
GAMMA	Select Gamma Mode: Select the gamma mode with the				button.
	NORMAL	CINEMA	DYNAMIC

14ViewSonic PJ1065