Options Menu
The following adjustments and settings are available when OPT. is selected on the menu. Select an item with the and buttons, and start operation.
Table 7: Options Menu
Item | Description |
|
| ||
|
|
| |||
VOLUME | Volume Adjustment: Reduce VOLUME | Increase VOLUME | |||
|
|
|
| ||
MENU | Select Menu Background Color: Select with the | and | buttons. | ||
COLOR |
|
|
|
| |
|
|
|
| ||
LANGUAGE | Operation Start/Stop: Press the | button. |
| ||
Select Menu Display Language: Select with the | and | buttons. | |||
| |||||
|
|
|
| ||
| Operation Start/Stop: Press the | button. |
| ||
| Set AUTO OFF: Set | and buttons. The system | |||
| automatically enters the standby mode when a signal is not received for the set | ||||
AUTO OFF | time. |
|
|
| |
| Clear AUTO OFF: Select STOP (0 min.) with the | button. When STOP is | |||
| selected the system does not enter the standby mode even if no signal is | ||||
| received. |
|
|
| |
|
|
|
| ||
| Operation Start/Stop: Press the | button. |
| ||
| SYNC ON G Valid: Select TURN ON with the | button. |
| ||
SYNC ON G | SYNC ON G Invalid: Select TURN OFF with the | button. |
| ||
• May not be displayed correctly with some input signals when SYNC ON G is | |||||
| |||||
| valid. In such cases, remove the signal connector so that no signal is received, | ||||
| set SYNC ON G to invalid, and reconnect the signal. |
| |||
|
|
|
| ||
| Set / Clear WHISPER Mode: Press the |
| button. When WHISPER is | ||
WHISPER | selected, the WHISPER mode is active. In the WHISPER mode, acoustic noise | ||||
| level from the unit is reduced, and brightness level on screen is a little lower. | ||||
|
|
|
|
|
ViewSonic PJ1065 15