ViewSonic manual INPUT Menu, Description, ViewSonic PJ510

INPUT Menu

With the INPUT menu, the items shown in the Table below can be performed. Perform each operation in accordance with the instructions in the table below.

Item		Description
COLOR SPACE	Select a Color Space Mode:
	AUTO(S)Q(T)RGB(S)Q(T)SMPTE240(S)Q(T)REC709(S)Q(T)REC601
	•	This item can be selected only at a RGB input or a COMPONENT VIDEO input.
	•	When the AUTO is selected, the optimum mode is automatically selected. However, it may not
		work well at some signals. In such a case, select the SMPTE240 or REC709 for HDTV signal.
COMPONENT	Select a Function of COMPONENT VIDEO Jacks:
	COMPONENT (S) Q (T) SCART RGB
	• When the SCART RGB is selected, the COMPONENT VIDEO jacks function as ports for a RGB
		input with a SCART cable. Refer to the section “Signal Connector Pin Assignment” of
		“TECHNICAL”.
VIDEO	Select a Signal Type Mode:
	AUTO (S) Q (T) NTSC (S) Q (T) PAL (S) Q (T) SECAM (S)  (T) NTSC 4.43 (S) Q (T) M-
	PAL (S) Q (T) N-PAL
	•	This item performs only at a VIDEO input or a S-VIDEO input. For a COMPONENT VIDEO input,
		although this item is ineffective, the signal type is identified automatically even if the AUTO is not
		selected. For HDTV signals, refer to the HDTV item below
	•	Selecting the AUTO automatically selects the optimum mode. However, it may not work well at a
		PAL60 signal and some other signals. If the picture becomes unstable (ex. a irregular picture,
		color lack), please select the mode depending on the input signal.
	•	The AUTO operation requires approximately 10 seconds.
FRAME LOCK	Select the Frame Lock Mode:
	TURN ON (S) Q (T) TURN OFF
	•	This function performs only at a RGB input with vertical frequency of 48 to 72 Hz.
	•	When the TURN ON is selected, a moving picture is displayed more smoothly.
	•	This function may cause a certain degradation of the picture. In such a case, please select the
		TURN OFF.
3D-YCS	Select a 3D-YCS mode:
	STILL IMAGE (S) Q (T) NORMAL (S) Q (T) TURN OFF
	•	This function performs only at a VIDEO input of NTSC 3.58.
	•	NORMAL is the mode for images with a lot of motions like movies, and STILL IMAGE is the mode
		for images with few motions or completely still ones like slides.
	•	When this function performs, the VIDEO NR function is ineffective

25 ViewSonic PJ510