SCREEN Menu
With the SCREEN menu, the items shown in the Table below can be performed. Perform each operation in accordance with the instructions in the table below.
Item |
| Description |
|
| |
BLANK | Select a Blank Screen Color: | |
| BLUE (S) Q (T) WHITE (S) Q (T) BLACK | |
| • | The blank screen of selected color is displayed by pressing the BLANK button. Please refer to the |
|
| section “Temporarily Blanking The Screen” of “Operation” about the screen blanking. |
|
| |
START UP | Select the Start Up Screen: | |
| TURN ON (S) Q (T) TURN OFF | |
| • | If the TURN OFF is selected when there is no signal or the detected signal is out of specifications, |
|
| the blank screen is displayed. |
|
| |
MENU POSITION | Adjust a Menu Position: | |
| Pressing the (X) or ENTER button start adjusting, | |
|
| Up |
|
| (S) |
|
| |
|
| Left (W) (X) Right |
|
| |
|
| (T) |
|
| Down |
| • | The (W) button does not finish this item. When you want to return to the previous display, please |
|
| press the ESC button. |
|
| |
MESSAGE | Select the Message Mode: | |
| TURN ON (S) Q (T) TURN OFF | |
| • | When the TURN OFF is selected, the following message functions are disabled: |
|
| The message of “AUTO IN PROGRES” |
|
| The message of “NO INPUT IS DETECTED” |
|
| The message of “SYNC IS OUT OF RANGE” |
|
| The message while being searched for an input signal, “Searching …..” |
|
| The message when an input signal is detected, “Detecting …..” |
|
| The indication of the input signal by input change. |
|
| |
RESET | Reset the SCREEN Menu Items: | |
| Selecting the EXECUTE performs this function. | |
| EXECUTE (S) CANCEL | |
| • | The items of the SCREEN menu are collectively returned to the initial setting.. |
|
|
|
ViewSonic PJ510 | 28 |
