ViewSonic PJ510 manual Video NR, Progressive, Information, S2-ASPECT

INPUT Menu(Continued)

Item		Description
VIDEO NR	Select a Noise Reduction Mode:
	HIGH (S) Q (T) MIDDLE (S) Q (T) LOW
	•	This function performs only at a VIDEO input or a S-VIDEO input. At a VIDEO input of NTSC 3.58,
		this function performs only when the TURN OFF is selected under the 3D-YCS.
	•	When the HIGH, the MIDDLE or the LOW is selected, the noise on screen is reduced according to
		each mode.
	•	When this function is excessive, it may cause a certain degradation of the picture.
PROGRESSIVE	Select the Progressive Mode:
	TV (S) Q (T) FILM (S) Q (T) TURN OFF
	•	This function performs only at an interlaced signal of a VIDEO input, a S-VIDEO input or a
		COMPONENT VIDEO input of 525i or 625i signal. The FILM mode is adaptable to the 3-2 Pull-
		Down system to the conversion.
	•	When the TV or FILM is selected, the resolution is raised.
	•	This function may cause a certain degradation of the picture. In such a case, please select TURN
		OFF.
INFORMATION	Display the Information:
	Pressing the (X) or the ENTER button performs this function.
	•	Use this function when you want the information about the current input (ex. the resolution and the
		vertical frequency at a RGB input, the signal type of a video input) and setting states of the
		COMPONENT, the VIDEO and the FLAME LOCK.
S2-ASPECT	Select the S2-ASPECT Mode:
	TURN ON (S) Q (T) TURN OFF
	•	This function performs only at a S-VIDEO input.
	•	When the TURN ON is selected, an S2-Video signal can be identified and the optimum aspect
		ratio is automatically selected.
	•	When the ASPECT button of the remote control is used or the ASPECT item of the MAIN menu is
		operated, the S2-ASPECT mode will be switched to the TURN OFF automatically.
RESET	Reset the INPUT Menu Items:
	Selecting the EXECUTE performs this function.
	EXECUTE (S)  CANCEL
	•	The items of the INPUT menu are collectively returned to the initial setting. Note that the
		INFORMATION item is not reset.

ViewSonic PJ510 26