Turning Off The Power
NOTE:
Turn the power on/off in right order. Please power on the projector before the connected devices. Power off the projector after the connected devices.
1Press the STANDBY/ON button of the projector or the remote control.
The message “Power off?” will appear on the screen for approximately 5 seconds.
2Press the STANDBY/ON button again while “Power off?” the message is visible.
The projector lamp will go off, and the POWER indicator will begin blinking orange.
Then the POWER indicator will stop blinking and light to solid orange when the lamp cooling is complete.
3Switch the power switch to [O] (OFF).
Power switch (ON position)
The POWER indicator will go off.
4Attach the lens cap.
POWER indicator
STANDBY/ON button
Power switch
STANDBY/ON button
15 ViewSonic PJ510
