Power ON/OFF
Turning On The Power
WARNING
When the power is ON, a strong light is emitted. Do not look into the lens or vents of the projector.
NOTE:
Turn the power on/off in right order. Please power on the projector before the connected devices. Power off the projector after the connected devices.
1Make sure that the power cord is firmly and correctly connected to the projector and outlet.
2When the lens cap is attached, remove the lens cap.
3Set the power switch to [ ] (ON).
Power switch (ON position)
The POWER indicator will light orange.
4Press the STANDBY/ON button
of the projector or the remote control.
The projector lamp will light up and the POWER indicator will begin blinking green.
According to a setup, the projector lamp may light up and the POWER indicator may begin blinking green, without pressing this button.
When the power is completely on, the indicator will stop blinking and light green.
POWER indicator
STANDBY/ON button
Power switch
STANDBY/ON button
13 ViewSonic PJ510
