Page 1 of 2
DISASSEMBLY/ASSEMBLY INSTRUCTIONS FOR YOUR PERSONAL WINECELLAR
7.Carefully tilt the unit back and place’on cardboard packing or padding so as to not damage the cabinet.
8.With the 4mm Hex Wrench, careftilly remove bolts on side of cabinet and place side on cardboard.
9.Having someone holding the top and bottom ends, remove bolts on other side. Place the side on cardboard.
10.Remove the bolts at top of unit. Place top on cardboard.
Now your winecellar is ready to be carefully moved into its final destination.
ASSEMBLY INSTRUCTIONS
1.Install the casters all the way in on the bottom piece first.
2.To assemble our unit follow the disassembly instructions in reverse.
3.If doors appear not to be aligned, level the cellar as best possible by screwing the casters back out slowly checking alignment with each adjustment.
4.The unit can be moved to your desired location, being sure to allow 5 to 6 inches of clearance from the back of winecellar to the wall.
5.Your unit is now ready. to plug into a dedicated 110/115 volt outlet for your winecellar. We recommend that you do not plug your winecellar into an outlet used for other electronic items in addition to the winecellar.
Page 2 of 2
