VIPowER VPM-6248T instruction

VPM-6248T

USB 2.0 5.25-inch

External Enclosure

with MobileRACK

User’s Manual

Image 1

VIPowER VPM-6248T user manual

Contents

VPM-6248T Proprietary Notice Contents Introduction Features and SpecificationsVPM-6248T External Enclosure Operating Systems MobileRACK Package Contents Package Checklist Temperature Control Jumper Settings Hardware InstallationRemove Mounting Screws to Remove Cover Temperature Control Jumper Locations Factory Configuration with MobileRACK Configuration with the MobileRACK Mounting a 3.5-inch Drive in the MobileRACK LED IndicatorsVPM-6248T Front Panel with the MobileRACK Remove the MobileRACK Drive Tray Remove Front Panel for Removable Media Drives Remove the MobileRACK Drive Tray Cover Mount the Drive in the MobileRACK Drive Tray MobileRACK Drive Tray with Cover Removed Replace the MobileRACK Drive Tray Cover Connecting the VPM-6248T to a ComputerComputer Requirements Insert Drive Tray into VPM-6248T Enclosure Slide the Latch-switch Left to Lock VPM-6248T Connections VPM-6248T External Connector Locations Windows 98SE Driver Installation Step Select Win98 under the Drivers directory, then click OK Click Next Step Windows Me/2000/XP Mac OS Connecting the VPM-6248T to Computer Using the VPM-6248T External Enclosure Windows Disconnecting the VPM-6248T from ComputerWindows Me/2000/XP Latch-lock Switch Positions Using the MobileRACK Drive TrayMac OS Partitioning Under Windows 98/ME Partitioning the External USB 2.0 Hard DiskMethod At the DOS prompt, type Fdisk and press Enter Step Partitioning under Windows 2000/XP Step Step Printed on recycled paper