Manuals / VIPowER / Computer Equipment / Computer Drive

VIPowER VPM-6248T Configuration with the MobileRACK, Factory Configuration with MobileRACK, 2-pin

Models: VPM-6248T

1 32

Page 9

2-2 Configuration with the MobileRACK

The following information is for reference only. The VPM-6248T is factory configured with the MobileRACK docking case installed with these settings.

Jumper JP6, and CN6 with a 2-wire red-black cable connector, are located on the rear PCB panel of the enclosure. These enable operation of the MobileRACK with the VPM-6248T enclosure.

The default jumper setting for JP6: pins 2-3 ON.

			JP8
			Temperature
			Control Jumper
Power		Power	USB
Switch		Conn.	Port
			LED
			Fan
JP6			Power
CN6		JP7	40-Pin IDE Data
		JP7	Connector
		Temperature	Connector
2-pin		Temperature
2-pin		Control
Red-Black Cable		Jumper
3	JP6 (2-3 ON) & CN6 : configuration with
2	MobileRACK (factory default setting)
1	MobileRACK (factory default setting)
1

Factory Configuration with MobileRACK

VPM-6248T USER MANUAL

Page 9

Image 9

VIPowER VPM-6248T Configuration with the MobileRACK, Factory Configuration with MobileRACK, 2-pin, Red-Black Cable

Contents

VPM-6248T User’s ManualUSB 2.0 5.25-inch External Enclosure with MobileRACK TRADEMARKS PROPRIETARY NOTICE3. Drivers Installation 2. Hardware Installation4. Using The VPM-6248T External Enclosure 1. Introduction1-1 Features and Specifications 1. IntroductionVPM-6248T External Enclosure Operating Systems MobileRACKPackage Contents 1-2 Package Checklist2. Hardware Installation 2-1 Temperature Control Jumper SettingsRemove Mounting Screws to Remove Cover Note Only one jumper can be set at the same time Temperature Control Jumper LocationsJP8 Temperature Control Jumper PowerFactory Configuration with MobileRACK 2-2 Configuration with the MobileRACKJP6 2-3 ON & CN6 configuration with MobileRACK factory default setting2-4 Mounting a 3.5-inch Drive in the MobileRACK 2-3 LED IndicatorsVPM-6248T Front Panel with the MobileRACK StepRemove Front Panel for Removable Media Drives Remove the MobileRACK Drive Tray CoverStep StepMount the Drive in the MobileRACK Drive Tray MobileRACK Drive Tray with Cover RemovedStep StepReplace the MobileRACK Drive Tray Cover 2-5 Connecting the VPM-6248T to a ComputerComputer Requirements Insert Drive Tray into VPM-6248T EnclosureStep Slide the Latch-switch LEFT to LOCKStep StepVPM-6248T Connections VPM-6248T External Connector LocationsStep Step3-1 Windows 98SE 3. Driver InstallationStep StepStep Select “Display a list of all drivers” then click NextStep 4. Click Browse Step Double click on the ViPowER CD icon of the My Computer directoryStep Select “Win98” under the “Drivers” directory, then click OKVPM-6248T USER MANUAL Step 7. Click Next Step 8. Click NextStep The system will request you to restart your computer. Click FINISHStep Step 3-2 Windows Me/2000/XP3-3 Mac OS 4-1 Connecting the VPM-6248T to Computer 4. Using the VPM-6248T External EnclosureStep StepWindows 4-2 Disconnecting the VPM-6248T from ComputerWindows Me/2000/XP StepLatch-lock Switch Positions 4-3 Using the MobileRACK Drive TrayMac OS DOING SO MAY RESULT IN LOSS OF DATA5-1 Partitioning Under Windows 98/ME 5. Partitioning the External USB 2.0 Hard DiskMethod StepStep MethodStep Step2.0 Hard Disk, the data of your internal hard disk will be destroyed If you don’t change the fixed disk drive to the USBStep StepStep 5-2 Partitioning under Windows 2000/XPStep Step wizard” will appearStep Printed on recycled paper

2-2 Configuration with the MobileRACK

2-pin

Red-Black Cable

JP6 (2-3 ON) & CN6 : configuration with

MobileRACK (factory default setting)

Factory Configuration with MobileRACK