VIPowER VPM-6248T user manual Method, Step

Method 2

Step 1:

Go into MS-DOS mode by clicking on [Start], then choose the [MS-DOS Prompt] in [Programs].

Step 2:

At the DOS prompt, type [FDISK] and press [Enter].

Step 3:

If FDISK quits without any message, go back to the Windows 98 screen, disconnect the VPM-6248T USB 2.0 Hard Disk and reboot the computer. Reconnect the USB 2.0 HDD and go back to Step 1 to proceed.

Step 4:

For the first screen of FDISK, answer the question: Do you want to enable large disk support?

[Y]if you want to build a partition larger than 2GB.

[N]if you want to build a partition small than 2GB.

Step 5:

The next screen is [FDISK OPTIONS]. Type [5] to select the disk.

VPM-6248T USER MANUAL 27