LED States
The MiFi Device LEDs provide valuable information about the state of the device and connection
Service Status LED
No Light
Green
— | Device is powered off. |
Solid | The MiFi Device is powered on and connected |
| to a mobile broadband network, but is not |
| transmitting or receiving data. |
Slow Blinking | The MiFi Device is powered on but there is no |
| service. |
Intermittent Blinking | The MiFi Device is transmitting / receiving |
| mobile broadband data. The blinking rate is |
| proportional to the data speed. |
Power Button LED
No Light
Green
Red
Amber
—
Solid Glowing
Blinking
Solid
Blinking
Device is powered off.
The MiFi Device is powered on and fully charged.
The MiFi Device is in standby mode (power saving). Press the power button to wake up the device.
Battery is critically low.
Battery is charging.
Error. [See Troubleshooting (page 57).]
Caring for Your Device
As with any electronic device, the MiFi 2200 Device must be handled with care to ensure reliable operation. Novatel Wireless recommends the following handling guidelines:
•• Do not apply adhesive labels to the MiFi 2200 Device; they may cause the device to potentially overheat and they may alter the performance of the antenna system.
•• The USB connector cable should plug easily into your computer’s Type A USB port. Forcing the device into a port may damage the connector.
•• Protect the MiFi 2200 Device from liquids, dust, and excessive heat.
•• Store the MiFi 2200 Device in a safe place, when not in use.
8
