12VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
Please see the Readme file in the PaperPort directory on your computer’s hard drive. The Readme file contains additional information that may help you diagnose problems connecting the scanner. Also see “Troubleshooting” on page 52 for more information.
Note: The scanning lamp under the scanner’s glass needs to warm up before you can scan. A status message lets you know when the lamp is ready. The lamp then remains ready so you don’t have to wait each time you want to scan. To conserve electricity and prolong the life of the scanner, you can set the length of time for the lamp to remain lit before powering down. See “Setting Preferences” on page 26.
To connect the scanner:
1.After checking for all the above problems,
The shortcut menu appears.
2.Choose Connect from the shortcut menu.
The software finds the scanner and makes the connection. The scanner icon will no longer have a red X through it, and you’re ready to begin scanning.
If you try all the troubleshooting procedures described above and in the Readme file, and the scanner icon still has a red X through it, you may have a malfunctioning scanner. Please see “Contacting Visioneer America Technical Support” on page 58 or “Contacting Visioneer— International Technical Support” on page 59. Also visit our web site at www.visioneer.com for additional technical information. You can also receive software updates from the Windows Start menu by choosing Programs, then PaperPort, then Check for OneTouch Updates.
