Visioneer MX 230 manual Taking Pictures, To take a picture

TAKING PICTURES 15

TAKING PICTURES

You are now ready to take a picture. For basic point-and-click picture taking, use the Snapshot mode described below. To customize settings or use different modes, see “Exploring Your Camera’s Features” on page 19.

To take a picture:

1.Press the On/Off button located on the back of the camera to turn the camera on.

■After a short pause, the LED stops flashing. The camera is ready to take a picture.

2.Rotate the Mode dial to Snapshot.

3.Look through the viewfinder to aim the camera at the subject.

■Or press the Display button to turn on and view the subject through the LCD.

4.If desired, use the Telephoto T and Wide Angle W buttons to zoom in and out on the subject.

■When zooming in, the optical zoom is first activated. After zooming to a maximum of x3.0, if you continue to press the Telephoto button, the digital zoom is activated.