40VISIONEER MX 230 DIGITAL CAMERA USER’S GUIDE
CONNECT TO YOUR COMPUTER THE FIRST TIME
The first time you connect your camera to your computer, the computer recognizes the camera as a new piece of hardware and leads you through the installation. This is a
To install your camera to copy photos and video clips:
1.Connect the small connector of the USB cable to the USB port on the camera. See “Back View” on page 6 for the position of the USB port on the camera.
2.Connect the large end of the USB cable to an empty USB slot on your computer. To locate a USB slot, look for the USB icon next to the connection slot. 
3.Set the camera’s Mode dial to any mode except PC. 
4.Turn on the camera.
5.Your computer detects the connection to the camera and initiates installation of the new hardware.
■Depending on the Windows operating system installed on your computer, the installation may proceed automatically, or you may be asked to follow the instructions in a new hardware installation wizard.
