
TROUBLESHOOTING 53
Problem: The flash doesn’t work.
Possible Cause | Solution |
The flash is not turned on.
Ensure that the flash is set to the Automatic or Always On options. Refer to page 34.
The batteries are weak and the flash is unable to recharge.
Turn the camera off and wait a few seconds before turning it back on. If this doesn’t work, replace the batteries.
Problem: When turned on, the LED flashes green, red, orange, and green. Then the camera does not function.
Possible Cause | Solution |
The Secure Digital card is not inserted correctly.
Turn the camera off. Remove and reinstall the Secure Digital card, see page 9 for details.
Problem: The Visioneer Digital Camera Utility will not run when the camera is set to PC mode.
Possible Cause | Solution |
Your computer monitor’s display is set to less than 24 bit color depth.