8VISIONEER NETSCAN 4000 USERS GUIDE
Status LEDs —Indicates the hardware status.
BEFORE YOU BEGIN
The scanner has to be setup properly on your network to perform the
e-mail and filing functions. Before using the scanner, please setup the
scanner properly on your network for e-mail and filing function. The
following network parameters have to be set.
The Power LED—Used to indicate the power on and ready
status.
The Alarm LED—Used to indicate hardware and
transmission errors.
The Energy Saving LED—Used to indicate power-saving
status.
Important: Make a copy of the following table and ask your Network
Administrator to complete the information.
1. DHCP Enable:
2. IP Address: . . .
3. Subnet Mask: . . .
4. Gateway IP: . . .
5. DNS Server: . . .
6. SMTP Server:
7. SMTP Port: 25
8. POP3 Server:
9. POP3 Port:
10. LDAP Server: . . .
11. LDAP Port: