VISTA-10SE Installation and Setup Guide
9-2
Dynamic Signaling Feature
This VISTA-10SE control panel features Dynamic Signaling Delay (DSD) and Dynamic
Signaling Priority (DSP) message reporting when Long-Range Radio is used. These
message outputs are accessed through data field ✱93. The Dynamic Signaling feature is
designed to reduce the number of redundant reports sent to the central station.
The features are described as follows:
• Dynamic Signaling Delay (DSD)
You can select the time the panel should wait for acknowledgment from the first
reporting destination before it attempts to send a message to the secon d destination.
Delays can be selected from 0 to 225 seconds, in 15-second increments. This choice is
made by the first entry in field ✱93. This delay is applicable to each individual message.
• Dynamic Signaling Priority (DSP)
You can select the initial reporting destination for messages, Primary Dialer or Lon g-
Range Radio. This choice is made by the second entry in field ✱93.
The chart below provides a concise explanation of how the Dynamic signaling feature
functions.
If Priority (✱93, 2nd
entry) is…And message is…Then…
Acknowledged before delay
expires Message is removed from queue and
no message is sent to LRR.
Primary Phone No.
("0" entered)
Not acknowledged before delay
expires Message is sent to both the Primary
Phone Number and LRR.
Acknowledged before delay
expires Message is removed from queue and
no message is sent to Primary
Phone Number
Long-Range Radio
("1" entered)
Not acknowledged before delay
expires Message is sent to both the Primary
Phone Number and LRR.
You must enable field ✱27, OUTPUT TO LONG-RANGE RADIO, if this feature is to function.