VistaQuest sensor 505-D user manual Choosing a Startup Image, Setting the Logo

Choosing a Startup Image

Setting the Logo

1

2

3

Turn the power on, and set the camera to the Playback mode.

Select a still image as startup image.

Press or on the five-way control button to select a still image.

Open the menu.

Press the MENU button, then use the five-way control button to select [Set Logo] then press on the five-way control button to launch the submenu: [Yes]; [No].

4

Apply the setting.

Press or on the five-way control button to select [Yes] then press OK/Enter to apply the setting.

5 Close the menu.

Press the MENU button to close the menu.

Caution

•The startup image will not be deleted even if the original image is deleted or the memory is formatted.

36