Troubleshooting

Problem

Cause

Solution

Power does not turn camera

Batteries are inserted in the

Reload batteries in the correct

on.

wrong direction.

direction.

 

 

 

 

Batteries are dead.

Replace or recharge batteries.

 

 

 

 

The battery compartment door

Make sure the battery

 

is open.

compartment door is securely

 

 

closed.

 

 

 

The camera does not take

The flash is charging.

Wait for the flash to charge.

pictures.

 

 

Memory is full.

Insert a new memory card.

 

 

 

 

Memory card is not formatted

The card may be defective:

 

correctly.

use a new card.

 

 

 

Image is not recorded when

The flash is charging.

Wait for the flash to charge.

the shutter button is pressed.

 

 

Memory is full.

Insert a new memory card.

 

 

 

The flash does not fire.

Flash is set to OFF.

Set the flash to any mode

 

 

except off.

 

 

 

The image is blurred or out of

The camera was moving when

Hold the camera steady when

focus.

the image was captured.

shooting a picture.

 

 

 

The image is not displayed on

A memory card with

This camera cannot display

the LCD monitor.

non-PICT images (recorded

non-PICT images.

 

with another camera) is

 

 

loaded.

 

 

 

 

Recorded images are not

The camera was turned

If the battery low indicator

saved in memory.

off/powered down before

appears on the LCD monitor,

 

saving images to the

replace the battery

 

memory.

immediately.

 

 

 

43

Page 48
Image 48
VistaQuest sensor 505-D user manual Troubleshooting, Problem Cause Solution