4.Select desired programmed setting by pressing any of the
NOTE: If you detect a change in the sound of the machine or if a hard or foreign object comes into contact with the blades, do not serve the drink. Inspect your blade assembly for loose, knicked or missing parts. If parts are loose, missing or knicked, replace with a new blade assembly. (See page 17.)
5.Once one of the six
6.During any of the blending cycles, by pressing the PULSE H button, the speed of the blending can increase up to 100% of the motor speed. By pressing the PULSE L button during a blending cycle, the speed of the motor can be decreased down to 7%. Once released, the motor speed will revert back to the blending cycle of the
PRE-SET PROGRAM.
NOTE: Use the SPEED CONTROL buttons to set the speed of the PULSE buttons. For example, when the H or L PULSE button is pressed and held, by simultaneously pressing and holding the ▲ or ▼ SPEED CONTROL button the motor speed will increase or decrease in 1% increments. When the SPEED CONTROL button is released, the PULSE button will remain set at the selected speed until altered with the SPEED CONTROL buttons.
7.When the cycle is complete, the blender stops. Wait until blade comes to a complete stop before removing the lid and/or container from the motor base.
8.Remove the container, pour, garnish and serve the drink.
How to operate your Blending Station® MP using the Start/Stop and Speed Control buttons.
Although using the
CONTINUED ON PAGE 16
15
