Vita-Mix XTG012 owner manual L id Assembly, Two-PartLid, One-PieceLid optional, Cover Door

L id Assembly

NOTE: Outside the United States and Canada, your Blending Station® MP may come with a different container configuration.

Two-Part Lid

48 oz. (1.4 liter) Maximum Performance Container

The two-part lid is easy to clean and easy to put on, take off and seal.

•To remove a fully latched lid, lift the two tabs and pull upward and off.

•Twist the center lid plug to fasten or remove.

NOTE: The Maximum Performance Container will not work on older Vita-Mix®machines. If the container does not fit on the centering pad and will not properly engage into the drive socket, the container is not compatible with your machine. Contact Vita-Mix for more information.

One-Piece Lid (optional)

48 oz. (1.4 liter) Maximum Performance Container

The one-piece lid is easy to clean and easy to put on and take off.

•There is no lid plug for this lid.

•Add ingredients through port on top.

Figure A

Figure B

Cover with Removable Hinge Design

Cover Door:

1.The Cover Door can be removed by opening it until the door is horizontal. Then, gently spread the sides of the door over the round hinges and remove.

2.To reinstall the Cover Door, gently spread the sides of the door and place the door hinge cutouts over the round hinges. (Figure C)

8