Vivitar DVR 850W owner manual Flash Short-cut button, Quality, Auto / Forced / Off

1. Press the Right/Left/Up/Down button to select the Flash Setup menu icon.

2.Press the OK button to open the Flash Setup submenu.

3.Press the Right/Left/Up/Down button to highlight and select the Flash Setup option icon you desire:

Auto / Forced / Off

4.Press the OK button to confirm, save your choice and exit to the Setting menu.

5.Press the DC button to revert back to the Photo capture mode.

6.Press the DC Shutter button to capture the photo using the flash option that you selected.

Note:

After selecting your Flash Setup choice, the corresponding icon will appear on the top of the LCD screen.

Selecting the Auto choice will let the camcorder decide when to use the flash in the present lighting conditions.

Flash Short-cut button

To activate and toggle between the flash options without going in the Setting menu, press the Right button. On each consecutive pressing the flash icon on the top of the LCD will change. Select the flash option and press the DC Shutter button to capture the photo.

Quality

This setting is used to compress the pictures you take in order to make their file-size smaller. While this has the advantage of enabling you to squeeze more photos into the available memory, picture quality is sacrificed.

1.Press the Right/Left/Up/Down button to select the Quality menu icon.

2.Press the OK button to open the Quality submenu.

26