DLP |
|
| ||
j t |
|
|
| |
|
|
|
| |
ITEM |
| DESCRIPTION | DEFAULT | |
|
|
|
| |
Color Temp | Press the cursor | button to adjust the color temperature. | High- | |
brightness | ||||
| Range: |
| ||
|
|
| ||
| High brightness mode 6400K, CT x = 0.3; CT y = 0.33 |
| ||
| Preset mode | From 5000K to 12000K (increments of 100K) |
| |
| Custom mode | Will update when hardware is available. |
| |
|
|
|
| |
Color Space | Press the cursor | button to adjust the color space. | RGB: | |
| (Range: RGB – YCbCr – YpbPr – SMPTE240M – Blue only) | Computer, | ||
|
|
| 5BNC, | |
|
|
| DVI | |
|
|
| YCbCr: | |
|
|
| DVI | |
|
|
|
| |
Video format | Press the cursor | button to adjust the video format. | Auto | |
| (Range: Auto – NTSC 50Hz 3.58MHz – NTSC 60Hz 3.58MHz – NTSC |
| ||
| 60Hz 4.43MHz – PAL 50Hz 4.43MHz – PAL 60Hz 3.58MHz – PAL 50Hz |
| ||
| 3.58MHz – PAL 60Hz 4.43MHz – SECAM50Hz 4.43MHz) |
| ||
|
|
|
| |
Color balance | Press the cursor | button to adjust the red/green/blue color balance. | 50 | |
Red/Green/ | (Range: 0 – 100) |
|
| |
Blue |
|
|
| |
|
|
| ||
Fleshtone | Skin colors can become corrupted during the broadcast process. Use this set- | 50 | ||
| ting to correct skin color as desired. |
| ||
| Press the cursor | button to adjust the Fleshtone. (Range: 0 – 100) |
| |
|
|
| ||
Film mode | Film is a digital video recording with the original recording encoded at 24 | On | ||
| fps (frame per second, i.e., |
| ||
| film source to progressive video at 60 fps with NTSC and PAL60Hz or at 50 |
| ||
| fps with PAL50Hz and SECAM. The result is |
| ||
| Press the cursor | button to enable or disable Film mode. |
| |
|
|
| ||
3D Comb | This technique provides near perfect Y/C separation for still images. | On | ||
Filter | Press the cursor | button to enable or disable 3D Comb Filter. |
| |
|
| |||
|
|
| ||
White | White Peaking increases the output in the brightest whites without changing | 10 | ||
peaking | the blacks and dark grays. It crushes the whites slightly, but it does not ap- pear |
| ||
| to clip them or seriously obscure white detail. If you prefer a stronger |
| ||
| image, adjust toward the maximum setting. For a smoother, more natural im- |
| ||
| age, adjust toward the minimum setting. |
| ||
| Press the cursor | button to adjust the White Peaking. (Range: 0 – 10) |
| |
|
|
| ||
Reset | Resets all Picture settings to default values | — | ||
|
|
|
| |
– 22 –
