DLP Projjjectttor—User’s Manuall
Power Safety
¤Only use the supplied power cord.
¤Do not place anything on the power cord. Place the power cord where it will not be in the way of foot traffic.
¤Remove the batteries from the remote control when storing or not in use for a prolonged period.
Replacing the Lamp
Replacing the lamp can be hazardous if done incorrectly. Refer to “Replacing the Projection Lamp” on page 38 for clear and safe instructions for this procedure. Before replacing the lamp:
¤Unplug the power cord.
¤Allow the lamp to cool for about one hour.
Spent Lamp Management
¤This product contains a metal halide lamp, which contains mercury. Dispose of it as required by lo- cal ordinances and regulations.
¤The USA restricts or prohibits the disposal of some or all mercury containing lamps in the municipal waste stream. Please visit www.lamprecycle.org for more information on specific state disposal re- quirements and recycling facilities.
¤The following states have laws that deal with information that wholesalers must provide to contrac- tors for lamp disposal.
Connecticut Maine Minnesota Rhode Island
¤For users in Connecticut, please call our toll free
1.Place the lamp in the box, complete the enclosed form, and seal the box with the pro- vided tape.
2.Affix the return shipping label to the box and call 1.800.463.3339 FedEx Ground Service for box pickup.
Cleaning the Projector
¤Unplug the power cord before cleaning. Refer to “Cleaning the Projector” on page 41.
¤Allow the lamp to cool for about one hour.
Regulatory Warnings
Before installing and using the projector, read the regulatory notices in the “Regulatory Compliance” sec- tion on page 55.
