Vivotek FE8174 user manual Image setting per channel

				VIVOTEK
bwmode	<boolean>	1	6/6	Switch to B/W in night mode if
				enabled
sensitivity	low,	normal	6/6	Sensitivity of light sensor
	normal,
	high
enableextled	<boolean>	0	1/6	External IR led enable

7.11 Image setting per channel

Group: image_c<0~(n-1)>for n channel products

NAME		VALUE		DEFAULT		SECURITY		DESCRIPTION
						(get/set)
brightness	-5~5		-5		4/4			Adjust brightness of image
								according to mode settings.
saturation	-5~5,100		0		4/4			Adjust saturation of image
							according to mode settings.
							100 for saturation percentage
							mode.
saturationpercent	0~100		50		4/4			Adjust saturation value of
								percentage when
								saturation=100
contrast	-5 ~ 5		0		4/4			Adjust contrast of image
								according to mode settings.
sharpness	-3~3,100		0		4/4			Adjust sharpness of image
								according to mode settings.
sharpnesspercent	0~100		50		4/4			Adjust sharpness value of
								percentage when
								sharpness=100
gammacurve	0~100		0		4/4			Gamma curve.
lowlightmode		<boolean>	1		4/4			Enable/disable low light mode.
profile_i0_enable		<boolean>	0		4/4			Enable/disable this profile
								setting
profile_i0_policy		day,		night	4/4			The mode which the profile is
		night,					applied to.
		schedule
profile_i0_begintime		hh:mm	18:00		4/4			Begin time of schedule mode.
profile_i0_endtime		hh:mm	06:00		4/4			End time of schedule mode.
profile_i0_brightness	-5~5		-5		4/4			Adjust brightness of image
								according to mode settings.

User's Manual - 161