Vivotek FE8174 user manual Uart control

VIVOTEK

				(get/set)
panspeed	-5 ~ 5	0	1/4		Pan speed
tiltspeed	-5 ~ 5	0	1/4		Tilt speed
zoomspeed	-5 ~ 5	0	1/4		Zoom speed
focusspeed	-5 ~ 5	0	1/4		Auto focus speed
patrolseq	string[64]	<blank>	1/4		(For external device)
					The indexes of patrol points,
					separated by “,”
patroldwelling	string[128]	<blank>	1/4		(For external device)
					The dwelling time of each patrol
					point, separated by “,”
preset_i<0~(npreset-1	string[40]	<blank>	1/4		Name of the preset location.
)>_name
preset_i<0~(npreset-1	0 ~ 999	0	1/4		The dwelling time of each preset
)>_ dwelling					location
uart	0 ~ (m-1), m	0	1/4		Select corresponding uart
	is UART count				(capability.nuart>0).
cameraid	0~255	1	1/4		Camera ID controlling external
					PTZ camera.
isptz	0 ~ 2	0	1/4		0: disable PTZ commands.
					1: enable PTZ commands with
					PTZ driver.
					2: enable PTZ commands with
					UART tunnel.
disablemdonptz	<boolean>	0	1/4		Disable motion detection on PTZ
					operation.

7.24 UART control

Group: uart (capability.nuart > 0)

NAME	VALUE		DEFAULT		SECURITY	DESCRIPTION
					(get/set)
ptzdrivers_i<0~19,	string[40]		<product	1/4		Name of the PTZ driver.
127>_name			dependent>
ptzdrivers_i<0~19,	string[128]		< product	1/4		Full path of the PTZ driver.
127>_location			dependent >
enablehttptunnel	<boolean>	0		4/4		Enable HTTP tunnel channel to
						control UART.

Group: uart_i<0~(n-1)>n is uart port count (capability.nuart > 0)

170 - User's Manual