VIVOTEK

System Log

Advanced Mode

This section explains how to configure the Network Camera to send the system log to the remote server as backup�

Remote Log

You can configure the Network Camera to send the system log file to a remote server as a log backup. Before utilizing this feature, it is suggested that the user install a log-recording tool to receive system log messages from the Network Camera. An example is Kiwi Syslog Daemon. Visit http://www�kiwisyslog� com/kiwi-syslog-daemon-overview/

Follow the steps below to set up the remote log:

1.In the IP address text box, enter the IP address of the remote server.

2.In the port text box, enter the port number of the remote server.

3� When completed, select Enable remote log and click Save to enable the setting�

Current Log

This column displays the system log in chronological order� The system log is stored in the Network Camera’s buffer area and will be overwritten when reaching a certain limit�

User's Manual - 95

Page 95
Image 95
Vivotek 7530D, MD7530 manual System Log, Remote Log, Current Log