Vivotek NR7401 manual Event Trigger

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Trigger

This page allows Administrator to configure the Network Video Recorder to react in response to particular event triggers. A typical reaction is that when a motion is detected by the network camera, the Network Video Recorder sends buffered images to a FTP server or e-mail address as notifications. You can configure up to 16 event triggers.

In the following illustration, an event can be triggered by many sources, such as motion detection or external alarm (digital input devices). When an event is triggered, you can specify what kind of action should be performed. You can assign the Network Video Recorder to send snapshots (.jpg) or .txt document to your e-mail address or FTP site.

Event Trigger	Action
	(what to do)

ex. Camera Disconnected, Motion detection on/off, Alarm on/off (Digital input)...

MediaServer

(what to send)	(where to send)
ex. Snapshot or .txt file	ex. Email, FTP

NR7401

(what to do)

ex. Turn on/off Relay (Digital output)

■Please configure the following items to please follow the steps below to add a new event trigger:

32 - User's Manual