VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Set up the Network Camera through Wireless Connection (PZ7132 only)
1.Check the SSID currently set on your wireless access point (AP).
2.Go to PZ7132's Configuration > Advanced mode > Wireless.
3.Type in the SSID consistent with the setting on your AP.
4.Select the Wireless mode as "Infrastructure".
5.Click Save. The Network Camera starts to reboot.
6.Wait for the live image is reloaded to your browser. Then, unplug the power cable and Ethernet cable from the Network Camera.
7.Replug the power cable to the camera. The Network Camera now operates in wireless mode.
ADSL/Cable/Hub
AP
PZ7132
NOTE
►SSID, abbreviated from Service Set Identifier, is the name assigned to the wireless network.
The PZ7132's factory SSID setting is set to "default".
►Select
►For detailed information about wireless connection, please refer to Wireless LAN on page 44.
User's Manual - 11
